Used machines
We have some used machines
We have a used CKJ R20 Pro machine is looking for a new home. This machine has been here for a little while but has had very little use and has been well looked after. We are going to be putting a CKJ R15 ProMax in it’s place.
We also have a CKJ R13 ProMax 8 tool for sale. This machine again has been used by us so has been well looked after and has had very little use due to us putting a CKJ R13 ProPlus which has become our daily working machine.
These machines are here and are plugged in so can be seen working.
Delivery can be arranged and is an additional cost.
CKJ R20 Pro
Specification:
- Linear square rail
- XYZ axis 2000mm X 3000mm X 200mm
- X and Y axis rack and pinion
- Accurate to 0.02mm
- Z-axis ball screw
- 415v 3 phase
- 6kw air-cooled spindle
- Hybrid Leadshine servo motors and drivers
- Oil lubrication system
- Vacuum bed with 2x 7.5kw vacuum pump
- Tool calibration
- ER32 collets 6mm and 12.7mm
- Refurbished Windows 10 laptop with Vcarve Pro and Mach 3 software
- Set up and ready to run
- Basic Training given
- Delivery can be arranged
CKJ R13 ProMax ATC 8 tool
Specification:
- Linear square rail on X and Y
- Z ball screw
- 415v 3 phase
- 9kw air cooled spindle
- Material positioning system with bars that rise out of the bed
- Oil lubrication system
- Vacuum bed with 7.5 kw vacuum pump
- 8 Tool magazine at the rear of the machine
- Vcarve pro design software (Aspire available at an additional cost)
- Shanlong system. Built in system running on windows operating system
- Manual Pulse Generator (MPG) controller
- Accurate to 0.02mm
- XYZ axis 1300mm X 2500mm X 200mm
- 1100W servo motors improving speed and performance
- Set up and ready to run
- Basic Training given
A compressor is required to run this machine (not included)
Mach3 is an advanced CNC controller for DIY. You can also run this software on Industrial machines. It runs the G-Code on Windows PCs. And it creates a sophisticated control system to control the activity of motors and generators
Vectric Vcarve Pro is fantastic user-friendly software with many tutorial videos and has the capability to import 3D files
We have a post processor on this software created by Vectric for our machines.
Free trial software is available here:
www.vectric.com/free-trial/vcarve-pro
read more on the Vectric website: www.vectric.com
Delivery and set-up of machines up to 1500 mm, within a 100-mile radius of our headquarters in Stroud, Gloucestershire, will be charged at £600 + VAT
For machines over 1500 mm wide, extra carrier fees will apply.
Quick Enquiry
If you would like to arrange a demo or have any questions, please use the form below. Alternately, please use the button in the bottom left to call us.
"*" indicates required fields
